當前位置:技術支持>人造板甲醛測試氣候艙工作原理 技術文章

          人造板甲醛測試氣候艙工作原理

          點擊次數:1308  更新時間:2021-09-21

          環境艙的設計參考標準

          Design reference standard of the environmental chamber

          1美國測試和材料協會標準

          (AMERICAN SOCIETY FOR TESTING AND MATERIALS,ASTM)

          1.1測試voCs釋放 Test on emission of voCs

          a、ASTM D 5116-97《小尺度環境箱測定室內材料和產品中有機釋放的標準指南》“Standard Guide for Small-Scale Environmental Chamber Determinations 0f Organic Emissions From Indoor Materials/Products"。

          b、ASTM D 6330-98《規定測試條件下小型環境箱測定木制板材中VOCs(除甲醛)釋放的標準操作》“Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based  Panels Using Small Environmental Chambers Under Defined Test Conditions"。

          c、ASTM D 6670-01《全尺度環境箱測定室內材料和產品VOCs中釋放的標準操作》“Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products"。

          1.2測試甲醛釋放 Test on emission of Formaldehyde

          a、E 1333—96《大型環境箱測定木制品釋放氣體中甲醛濃度和釋放率的標準測試方法》“Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber"。

          b、ASTM D 6007-02《小尺度環境箱測定木制品釋放氣體中甲醛濃度的標準測試方法》“Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber"。

          2 歐洲標準 (CEN European Committee for Standardization)

          a、ENV 13419-1《建筑產品—VOCs釋放量的測定第1部分:釋放測試環境箱方法》“Building products-Determination of the emission of volatile organic compounds-Part 1:Emission test chamber method"。

          b、測試甲醛釋放ENV 717-1《人造板甲醛釋放量測量環境箱法》test on the Formaldehyde emission , “Wood-Based Panels Determination of Formaldehyde Release-Part 1:Formaldehyde Emission by the Chamber Method"。

          3 中國標準:Chinese standard

          a、測試VOCs釋放:GB  18580-200 1《室內裝飾裝修材料—地毯、地毯襯墊及地毯膠粘劑有害物質釋放*》中附錄A(規范性附錄):小型環境試驗艙法。Test on emission of VOCs:GB 18580-200 1 “Indoor Decorating and Refurbishing Materials—Limitations of Harmful Substances Emitted from Carpets, Carpets Cushions and Adhesives" AppendixA (Normative Appendix): Small-Scale Environmental Chamber Determinations

          b、測試甲醛釋放GBl8580-2001《室內裝飾裝修材料——人造板及其制品中甲醛釋放*》中6.4節:氣候箱法測定飾面人造板甲醛釋放量。

          Test on emission of Formaldehyde: “Indoor Decorating and Refurbishing Materials—Limit of Formal Dehyde Emission of Wood-based Panels and Finishing Products" Section 6.4: Climate Chamber Determination of Dehyde Emission of Wood-based Panel Veneer.

          4  其它標準:Other standards

               ASTM D 5116-97

               ASTM D 3237-00

               ASTM D 6803-02

               ASTM D 6007-02

               ASTM D 6330-98

               ISO 16000-6 INDOOR AIR-PART 6

               JISA 1901

          *   試驗箱滿足以下試驗標準:

          *   Test chamber should satisfy the following test standards:

          ASTM D 6007-02

          加州ANSI/BIFMA X7.1-2007

          California ANSI/BIFMA X7.1-2007

          型號

          KLT-NT02

          KLT-NT1

          標稱內容積(升)

          225(1±2%)

          1000(1±2%)


          內部尺寸

          (mm)

          W

          550

          850

          D

          600

          1080

          H

          680

          1100


          外部尺寸

          (mm)

          W

          1100

          1460

          D

          796

          1285

          H

          1520

          1572







          溫度范圍

          15~30

          濕度范圍

          35~70 % RH

          溫度偏差

          ≤ ±0.5

          濕度偏差

          ≤ ± 2% RH

          溫度均勻度

          ≤±0.8 ℃

          濕度均勻度

          ≤ ±2 % RH

          溫度波動度

          ≤ ±0.5

          濕度波動度

          ≤ ± 2% RH

          換氣率

          0-1.5次/小時

          密封性

          艙內空氣泄漏率<5%*供氣率或加壓1kpa過壓,氣體泄漏率少于0.5%艙容/min

          中心風速

          0.1-1.0m/s(連續可調)

          相對正壓

          10±5pa

          加標回收率

          >80%

          本底值

          甲醛:≤0.006mg/m3

          溫度控制方法

          水循環間接控溫法

          濕度控制方法

          干氣、濕氣比例雙向調節法


          材料

          外殼

          Q235A冷軋鋼板1.5mm,表面靜電噴涂、白色

          內箱

          SUS304鏡面不銹鋼1.5mm(8k鏡面)

          絕熱

          高密度聚氨酯發泡+XPS

          密封

          硅膠(食品級)、聚四氟乙烯


          操作控制

          顯示器

          7英寸彩色觸摸屏,分辨率800x480,遠程控制(可選)

          自動記錄項目

          溫度、濕度、壓力(可選)、流量(可選)、運行時間、故障記錄

          控制方式

          溫控:比例、積分、微分(P.I.D);系統控制:PLC+HMI

          分辨率

          溫度:0.1 ℃;  濕度:0.1% RH

          通訊接口

          1個USB-A,一個USB-B,1個RS232,1個RS485,1個RJ-45(可選)

          粗存、記錄功能

          內存,U盤,SD卡

              補水水質、周期

          蒸餾水;>30天(連續運行)

              電源

          AC380(1±10%)V   (50±0.5)Hz   三相四線+保護接地

               裝機容量(Kw)

          2.5

          3.0

               重量(Kg)

          280

          320

               噪音(dB)

          ≤ 60dB

             系統保護

          制冷系統高低壓保護、過流保護;超溫保護;電機過流保護;缺水保護;電源欠相、相序保護等等。


          主站蜘蛛池模板: 泽普县| 贺州市| 武城县| 邵东县| 岳阳县| 济南市| 惠水县| 柯坪县| 镇江市| 海阳市| 卢氏县| 基隆市| 景宁| 邢台县| 乳源| 普格县| 郓城县| 滨海县| 高雄市| 绥阳县| 随州市| 定南县| 鹤庆县| 诸暨市| 白沙| 黎川县| 二连浩特市| 高唐县| 龙胜| 太湖县| 隆化县| 万载县| 台中县| 界首市| 凭祥市| 广元市| 和静县| 措美县| 潮安县| 九龙坡区| 酉阳|